Ch340g Driver Windows 10

21-04-2021 admin

The CH340 chip is used by a number of Arduino compatible boards to provide USB connectivity, you may need to install a driver, don’t panic, it’s easier than falling off a log, and much less painful.

Ch340g Driver Windows 10 Dell
Ch340g Driver For Windows 10

These drivers are static examples detailed in application note 197: The Serial Communications Guide for the CP210x, download an example below: AN197: The Serial Communications Guide for the CP210x. Download Software. The CP210x Manufacturing DLL and Runtime DLL have been updated and must be used with v6.0 and later of the CP210x Windows VCP Driver. Ch340g usb to uart interface datasheet wch version 1e dreamcity version 1.0 disclaimer from dreamcity innovations this is a third-party translation of wch s ch340 series chipset s chinese datasheet, with information regarding ch340g chip extracted. Drivers Hp Compaq Dx2100 Microtower Audio Windows 10. Our uno r3, so i am working with a number. Here you can download latest version of verified & working Windows 7 driver for Mini USB 2.0 to TTL 6Pin CH340G Converter sold as BTE13-009/USB. Drawing CH340 USB TTL Converter 8 Drawing CH340 USB TTL Converter 8 Data sheet, CH340G USB to UART Interface. CH340 is a pkg file, windows 10 64bit. Read the Docs v: latest. Versions latest Downloads On Read the Docs Project Home Builds Free document hosting provided by Read the Docs.Read the Docs.

Windows

(Manufacturer’s Chinese Info Link)

Download the Windows CH340 Driver
Unzip the file
Run the installer which you unzipped
In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.

Older Windows Driver Version and Instructions

~~Download the Windows CH340 Driver~~
~~Unzip the folder.~~
If you are running a 64Bit Windows: – run the SETUP_64.EXE installer.
If you are running a 32Bit Windows: – run the SETUP_32.EXE installer.
~~If you don’t know, try the 64 bit and if it doesn’t work, the 32 bit.~~
~~In the Arduino IDE when the CH340 is connected you will see a COM Port in the Tools > Serial Port menu, the COM number for your device may vary depending on your system.~~

Macintosh

(Manufacturer’s Chinese Info Link)

The following github has up to day pkg files for 1.3, 1.4 and 1.5 at time of writing, thanks to Joshua Wallis for bringing this to my attention…

Direct Download Links (from the github repo above):

See the github link above for installation instructions if you need them.

Previous macinstosh downloads if the above doesn’t work for you…

~~(V1.3) Download the CH340 Macintosh Signed Driver for Mavericks (10.9), Yosemite (10.10) and El Capitan (10.11) and Sierra (10.12)~~

~~Inside the zip file you will find a PDF and a “pkg” file, short version, double click the pkg file, the PDF has some extra information.~~

~~OSX Sierra (10.12) Note~~

~~A kindly user, Maarten Segers reports~~

~~FYI, the driver documented here WILL crash on OSX Sierra.~~

~~Make sure to use this one instead: https://github.com/MPParsley/ch340g-ch34g-ch34x-mac-os-x-driver~~

~~I can personally not test on MacOS and can not vouch for the above drivers at github, but there you go.~~

~~See uninstalling information at the bottom of the page if the driver causes problems for you.~~

~~Here is an older version of the Mac driver, NOT FOR 10.12 Sierra~~

~~(V1.0) Download the CH340 Macintosh Signed Driver for Mavericks (10.9), Yosemite (10.10) and El Capitan (10.11)~~

Linux

(Manufacturer’s Chinese Info Link)

Drivers are almost certainly built into your Linux kernel already and it will probably just work as soon as you plug it in. If not you can download the Linux CH340 Driver (but I’d recommend just upgrading your Linux install so that you get the “built in” one).

Uninstalling From Macinstosh

A couple of Mac users have said “the driver crashes my mac Sierra how do I uninstall”.